{"title":"New Slot Car Parts","description":"\u003cp\u003eBuild, repair or upgrade your ride.\u003c\/p\u003e","products":[{"product_id":"track-honey-track-condtioner","title":"Liquid – Track Honey Slot Car Track Conditioner Concentrate","description":"\u003cp\u003e\u003cstrong\u003eConcentrated slot car track conditioner designed to improve grip, reduce dust pickup and help maintain a consistent racing surface.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTrack Honey\u003c\/strong\u003e is a track-treatment formula used to prepare and maintain slot car racing surfaces.\u003c\/p\u003e\n\n\u003cp\u003eApplied correctly, it helps reduce the amount of dust and debris picked up by tires while encouraging the track surface to develop a light, consistent layer of tire material through normal racing.\u003c\/p\u003e\n\n\u003cp\u003eThe goal is a smooth, conditioned racing surface with a distinctive \u003cstrong\u003e\"candle wax\" feel — never sticky.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat Track Honey Does\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelps Reduce Dust Pickup\u003c\/strong\u003e – Keeps tires from collecting as much loose surface debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEncourages a Consistent Racing Surface\u003c\/strong\u003e – Helps the track develop grip gradually through use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUseful with Foam, Rubber \u0026amp; Silicone Tires\u003c\/strong\u003e – Can help different tire compounds coexist more successfully on the same layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelps Foam Tires Work on Plastic Track\u003c\/strong\u003e – Particularly useful where untreated plastic provides limited foam-tire grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Application Methods\u003c\/strong\u003e – Traditional diluted application or controlled microfiber wipe-on method\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow It Works\u003c\/h3\u003e\n\n\u003cp\u003eOn an untreated track, tires can pick up dust and debris that reduce consistency and traction.\u003c\/p\u003e\n\n\u003cp\u003eTrack Honey conditions the racing surface so tires stay cleaner while normal running gradually leaves behind a light layer of tire material.\u003c\/p\u003e\n\n\u003cp\u003eThis is similar to the way a full-size racing circuit develops additional grip as cars repeatedly run over the same surface.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe important goal is consistency, not stickiness.\u003c\/strong\u003e A properly conditioned track should feel smooth and slightly waxy — much like rubbing your fingers across candle wax.\u003c\/p\u003e\n\n\u003ch3\u003eTwo Ways to Apply Track Honey\u003c\/h3\u003e\n\n\u003cp\u003eWe use and recommend \u003cstrong\u003etwo different application methods\u003c\/strong\u003e. Both can produce an excellent racing surface when the Track Honey is spread thinly and worked into the track properly.\u003c\/p\u003e\n\n\u003ch3\u003eMethod 1 – Microfiber Wipe-On Application\u003c\/h3\u003e\n\n\u003cp\u003eThis is the more controlled method and is particularly useful when you do not want to work with a separate flammable solvent.\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eApply a small amount of Track Honey to a clean microfiber cloth.\u003c\/li\u003e\n\u003cli\u003eWipe it directly onto the racing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRub and spread the Track Honey thoroughly\u003c\/strong\u003e over the track.\u003c\/li\u003e\n\u003cli\u003eContinue working the surface until the treatment is distributed in a very thin, even film.\u003c\/li\u003e\n\u003cli\u003eCheck the finished surface with your fingertips.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe finished track should feel like candle wax — smooth and conditioned, but not sticky.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf an area feels tacky, continue rubbing and spreading the Track Honey with the microfiber cloth until the excess has been distributed.\u003c\/p\u003e\n\n\u003ch3\u003eWhy Use the Microfiber Method?\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter Application Control\u003c\/strong\u003e – You can see and feel exactly where the treatment is being placed\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo Separate Flammable Solvent Required\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo Overspray\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo Need to Clean Treatment from the Track Rails After Spraying\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eEasy to Work Extra Treatment Out of Sticky Areas\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe tradeoff is time. Wiping and working Track Honey into the track by hand takes longer than treating a large layout with the diluted method, but it provides considerably more control over the finished surface.\u003c\/p\u003e\n\n\u003ch3\u003eMethod 2 – Traditional Diluted Application\u003c\/h3\u003e\n\n\u003cp\u003eFor larger tracks, Track Honey can also be diluted using the traditional method.\u003c\/p\u003e\n\n\u003cp\u003eMix the complete bottle of concentrate with approximately \u003cstrong\u003e24 fl oz of VM\u0026amp;P naphtha\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003eAdd the entire contents to approximately 24 fl oz of VM\u0026amp;P naphtha.\u003c\/li\u003e\n\u003cli\u003eMix thoroughly in a solvent-compatible container.\u003c\/li\u003e\n\u003cli\u003eApply a very light, even coating to the racing surface using a solvent-compatible applicator.\u003c\/li\u003e\n\u003cli\u003eAllow the solvent to evaporate completely.\u003c\/li\u003e\n\u003cli\u003eRemove any treatment deposited on the electrical rails using a cloth lightly moistened with naphtha.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eAgain, the finished surface should have a \u003cstrong\u003elight candle-wax feel rather than a sticky surface.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eIf the track feels sticky, too much treatment remains in one area. Spread it farther or wipe the surface with a clean microfiber cloth until the treatment forms a very thin, even layer.\u003c\/p\u003e\n\n\u003ch3\u003eWhich Method Should I Use?\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor maximum control:\u003c\/strong\u003e use the microfiber wipe-on method.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFor faster treatment of a large track:\u003c\/strong\u003e the traditional diluted method may be more practical.\u003c\/p\u003e\n\n\u003cp\u003eWhichever method you choose, the key is the same:\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eUse very little Track Honey, spread it thoroughly, and stop when the track has that smooth \"candle wax\" feel. More is not better.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eImportant Safety Information for the Diluted Method\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eVM\u0026amp;P naphtha and similar petroleum solvents are highly flammable.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eUse only with adequate ventilation.\u003c\/li\u003e\n\u003cli\u003eKeep away from flames, sparks, heaters and other ignition sources.\u003c\/li\u003e\n\u003cli\u003eDo not smoke while mixing or applying.\u003c\/li\u003e\n\u003cli\u003eAllow solvent vapors to dissipate completely before operating electrical track equipment.\u003c\/li\u003e\n\u003cli\u003eFollow all warnings and instructions supplied with the solvent being used.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNo microfiber cloth, solvent or application container is included unless specifically stated in the listing.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eJim's Racer Perspective\u003c\/h3\u003e\n\n\u003cp\u003eTrack Honey is the treatment I use on our own club and event tracks when we want a clean, predictable racing surface that works with several different tire compounds.\u003c\/p\u003e\n\n\u003cp\u003eThe microfiber method takes more time, but I like the additional control. You can work the treatment directly into the track, avoid overspray and keep it off the electrical rails.\u003c\/p\u003e\n\n\u003cp\u003eWhichever method we use, I judge the application partly by feel. \u003cstrong\u003eI want the surface to feel like candle wax. If it feels sticky, there is too much Track Honey in that spot and it needs to be spread farther.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eOnce properly conditioned, normal racing continues to develop the surface rather than requiring us to constantly strip the track back to bare plastic.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Track Honey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Concentrated Slot Car Track Conditioner\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Methods:\u003c\/strong\u003e Microfiber wipe-on or diluted treatment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTraditional Dilution:\u003c\/strong\u003e Entire bottle to approximately 24 fl oz VM\u0026amp;P naphtha\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical Applications:\u003c\/strong\u003e Slot car racing surfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Tire Types:\u003c\/strong\u003e Foam, rubber and silicone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicrofiber Cloth Included:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OmniSlotBox","offers":[{"title":"Default Title","offer_id":46527794806981,"sku":"TRC-HNY-TRC-CND","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/Honey-5c0bd88.webp?v=1783895638"},{"product_id":"382818625-vigorelli-sticker-1-x-3-5-highest-quality-print-not-a-reproduction-4-each","title":"Decals – Vigorelli sticker, 1 x 3.5\" Highest quality print, not a reproduction.","description":"\u003cp\u003eVigorelli Vintage Stickers – Set of 4 – 1990s Dealer-Issue (1\" x 3.5\")\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cp\u003eAuthentic Vigorelli decals from the 1990s – not reproductions. Quantity: 4 stickers Size: 1\" x 3.5\" each Material: High-quality print on adhesive-backed stock Condition: Old dealer stock, unused and ready to apply Rarity: Genuine 1990s issue, hard to find in this condition well suited to restorations, tribute builds, or your vintage decal collection.\u003c\/p\u003e","brand":"OmniSlotBox","offers":[{"title":"Default Title","offer_id":46726016958661,"sku":"VIG","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p5.jpg?v=1786711777"},{"product_id":"truspeed-controller-handle-bolt-set-6-each","title":"Controller Hardware – TruSpeed Handle Bolt Set – 6 Pack","description":"\u003cp\u003eTruspeed Controller Handle Bolt Set – 6 Pieces Product Overview Keep your Truspeed controller in top condition with this handle bolt set. Designed as a direct replacement for lost or worn hardware, this pack includes 6 bolts, ensuring a secure fit for your controller handle. Whether you’re maintaining your gear or stocking spares, this set is a handy item to have in your pit box. Features \u0026amp; Specifications Brand: Truspeed Type: Controller handle bolt set Quantity: 6 bolts Purpose: Replacement hardware for Truspeed controller handles Condition: New – factory packaged\u003c\/p\u003e\n\u003cp\u003eCombined\u003c\/p\u003e\n\u003cp\u003eIf\u003c\/p\u003e","brand":"Truspeed","offers":[{"title":"Default Title","offer_id":46726017646789,"sku":"TRS-CNT-HND-BLT","price":3.5,"currency_code":"USD","in_stock":true}]},{"product_id":"tires-0-dot-375-id-x-0-dot-850-od-l-natural-donut-one-pair","title":"Tires, 0.375\"ID x 0.770\"OD L-Natural Donut One Pair","description":"\u003cp\u003eTires. 0.375\"ID x 0.770\"OD L-Natural Donut One Pair\u003c\/p\u003e","brand":"JK","offers":[{"title":"Default Title","offer_id":46726018367685,"sku":"DSV","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p24.webp?v=1786711816"},{"product_id":"tire-prep-bench-usb","title":"Tires – Prep Bench – battery powered","description":"\u003cp\u003eTire Prep Bench - 9 volt powered For fast cleaning of tires prior to racing. Spin tires on abrasive strip to remove oxidation, then drop in the sticky roller and spin to remove all dirt and dust. Power strip power car and can slide to allow use of entire roller. Peel roller for fresh adhesive, replacements in stock then needed. Fits all 1\/32 and 1\/24 scale cars. 9 volt battery power makes this portable and an advantage in your pit box. Not suitable for tire truing, but great for fast tire prep. Then go fast!\u003c\/p\u003e","brand":"OmniSlotBox","offers":[{"title":"Default Title","offer_id":46726018433221,"sku":"TR-PRP-BNC-BAT","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p26.webp?v=1786711820"},{"product_id":"super-tires-st1310rs-rounded-silicone-tires-for-carrera-1-32-nascars-spr-trs-st1-rnd2","title":"Tires – Super Tires ST1314R-S Rounded Silicone Tires for Carrera 1\/32 Next Gen","description":"\u003cp\u003eSuper Tires ST1314R-S Rounded Silicone Tires – Carrera 1\/32 Next Gen Camaro NASCAR Take your Carrera 1\/32 Next Gen Camaro NASCAR to the next level with Super Tires ST1314R-S Rounded Silicone Tires. Designed specifically for the newer NASCAR platform, these tires deliver a noticeable improvement in grip, stability, and consistency. If your car still feels loose or unpredictable in the corners, this is the upgrade that fixes it. Key Features: High-Grip Silicone Compound Smooth, predictable traction with no sudden breakaway Rounded Profile (R-S Design) Improves cornering balance and reduces chatter through turns Consistent Performance No tire prep, truing, or messy additives required Long-Lasting Won’t dry out or lose performance like stock rubber tires Fitment: Designed for Carrera 1\/32 Next Gen Camaro NASCAR models Optimized for the updated wheel and tire dimensions used on the Next Gen platform (Not sure if this is the right tire for your car? Just ask—I’ll help you get it right the first time.) Why Upgrade? Carrera’s stock tires are built for durability and casual use. These Super Tires unlock the real performance of your car—better grip, smoother handling, and more consistent lap times.\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726018597061,"sku":"SPR-TRS-ST1-RND2","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p31.webp?v=1786711835"},{"product_id":"super-tires-st1310rs-rounded-silicone-tires-for-most-carrera-132-gts","title":"Tires – Super Tires ST1310RS Rounded Silicone Tires for most Carrera 1\/32 GTs","description":"\u003cp\u003eSuper Tires ST1310RS Rounded Silicone Tires for most Carrera 1:32 GTs The full list of fitment is here:\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726018629829,"sku":"SPR-TRS-RND-SLC","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p32.webp?v=1786711836"},{"product_id":"super-tires-st1310rs-rounded-silicone-tires-for-most-carrera-1-32-gts","title":"Tires – Super Tires ST1310RS Rounded Silicone Tires for Carrera 1\/32 NASCARS","description":"\u003cp\u003eSuper Tires ST1310RS Rounded Silicone Tires for Carrera 1:32 NASCARS The full list of fitment is here:\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726018662597,"sku":"SPR-TRS-ST1-RND","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p33.webp?v=1786711838"},{"product_id":"super-tires-st12401ru-urethane-tires-for-carrera-audi-r8-ford-gt-porsche-gt3-dtm-corvette-c7r-porsche-911-rsr","title":"Tires – Super Tires ST12401RU URETHANE Tires for Carrera 1\/24 cars","description":"\u003cp\u003eSuper Tires ST12401RU Rounded Silicone Tires for Carrera 1:24 Take your Carrera 1\/24 car to the next level with Super Tires ST12401RU Rounded Silicone Tires. These tires deliver a noticeable improvement in grip, stability, and consistency. If your car still feels loose or unpredictable in the corners, this is the upgrade that fixes it. Key Features: High-Grip Silicone Compound Smooth, predictable traction with no sudden breakaway Rounded Profile (R-S Design) Improves cornering balance and reduces chatter through turns Consistent Performance No tire prep, truing, or messy additives required Long-Lasting Won’t dry out or lose performance like stock rubber tires Fitment: Designed for Carrera 1\/24 Porsche GT3 (1:24), Porsche 911 RSR (1:24), Mercedes AMG C63 DTM (1:24), Ford GT GTE (1:24), DTM - All (1:24), Chevrolet Corvette C7R, Audi RS 5 DTM, Audi R8 GT (Not sure if this is the right tire for your car? Just ask—I’ll help you get it right the first time.) Why Upgrade? Carrera’s stock tires are built for durability and casual use. These Super Tires unlock the real performance of your car—better grip, smoother handling, and more consistent lap times.\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726018728133,"sku":"SPR-TRS-ST1-S","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p34.webp?v=1786711840"},{"product_id":"super-tires-st1310rs-rounded-silicone-tires-for-carrera-1-32-nascars","title":"Tires – Super Tires 1308RYD Silicone Tires for Carrera Ferrari 458 Italia \u0026","description":"\u003cp\u003eSuper Tires 1308RYD Silicone Tires with ROUNDED SIDEWALLS for Carrera Ferrari 458 Italia \u0026amp; Ferrari 599XX - 2 Tires \/ Package - Diameter 0.858\" (21.79mm) - Width 0.410\" (10.41mm) The full list of fitment is here:\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726018826437,"sku":"SPR-TRS-ST1-RND1","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p35.webp?v=1786711842"},{"product_id":"super-tires-1308ryd-silicone-tires-for-carrera-ferrari-458-italia-and-ferrari-599xx","title":"Tires – Super Tires 1308R-S Silicone Tires for Carrera Ferrari 458 Italia \u0026","description":"\u003cp\u003eSuper Tires 1308R-S Silicone Tires with ROUNDED SIDEWALLS for Carrera Ferrari 458 Italia \u0026amp; Ferrari 599XX - 2 Tires \/ Package - Diameter 0.858\" (21.79mm) - Width 0.410\" (10.41mm) The full list of fitment is here:\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726018957509,"sku":"SPR-TRS-130-SLC","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p36.webp?v=1786711844"},{"product_id":"soft-copper-braid-for-commercial-style-jet-guide-pair","title":"Braid, Soft copper for commercial style \"Jet\" guide. Pair","description":"\u003cp\u003eSoft Copper Braid – Pair for Jet-Style Commercial Slot Car Guides High-Conductivity Braid for Serious Racers Product Overview This pair of soft copper braids is designed specifically for Jet-style commercial guide flags, commonly used in high-performance 1\/24 scale slot cars. Softer than typical braid, they offer superior contact, reduced friction, and improved current flow—ideal for maximizing performance on wood or routed commercial tracks. These are a must-have upgrade for serious racers running high-amp motors or precision club racing setups. Key Features Sold as a pair (enough for one car) High-strand count soft copper for excellent conductivity Optimized for Jet-style commercial guide flags Compatible with most 1\/24 scale commercial chassis Ideal for wood or routed track surfaces Provides low-resistance power transfer with less wear\u003c\/p\u003e","brand":"JK","offers":[{"title":"Default Title","offer_id":46726020268229,"sku":"SFT-CPP-BRD-FOR","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p55.webp?v=1786711884"},{"product_id":"slotinvasion-brm-and-revoslot-high-performance-guide-for-carrera-and-wood-tracks","title":"SlotInvasion NSR, high performance guide for Carrera \u0026 Wood Tracks","description":"\u003cp\u003eSlotInvasion NSR, high performance guide for Carrera \u0026amp; Wood Tracks– for Carrera® \u0026amp; Wood Tracks | Made in Germany Features: • NEW high-performance guide for Slot.it, FLY, Pioneer-Legends, Racer\/Sideways, Policar \u0026amp; most 3A3D slot cars • Designed for Carrera® 1\/32–1\/24 and routed wood tracks • Polyamide with fiberglass construction – strong, smooth, and long-lasting • Optimized blade thickness and length for Carrera® and wood geometry • Narrowed mid-section (≈30% less friction) for reduced drag and better speed • Angled brush cavities and micro guide for maximum track contact • Includes mounting screw and washer • Smooth lane changes and stable handling • Designed and manufactured in Germany Specifications: Brand: SlotInvasion Material: Fiberglass-reinforced Polyamide Compatibility: Slot.it, FLY, Pioneer-Legends, Racer\/Sideways, Policar, 3A3D Track Type: Carrera® 1\/32–1\/24 and routed wood tracks Includes: Guide, screw, and washer Country of Origin: Germany\u003c\/p\u003e","brand":"Carrera","offers":[{"title":"Default Title","offer_id":46726020366533,"sku":"SLT-BRM-AND-RVS","price":4.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p56.webp?v=1786711886"},{"product_id":"slotinvasion-slotit-high-performance-guide-for-carrera-wood-tracks","title":"SlotInvasion Slot.it, high performance guide for Carrera \u0026 Wood Tracks","description":"\u003cp\u003eSlotInvasion Guide for Slot.it, Pioneer-Legends, Racer\/Sideways, FLY \u0026amp; Policar – for Carrera® \u0026amp; Wood Tracks | Made in Germany Features: • NEW high-performance guide for Slot.it, FLY, Pioneer-Legends, Racer\/Sideways, Policar \u0026amp; most 3A3D slot cars • Designed for Carrera® 1\/32–1\/24 and routed wood tracks • Polyamide with fiberglass construction – strong, smooth, and long-lasting • Optimized blade thickness and length for Carrera® and wood geometry • Narrowed mid-section (≈30% less friction) for reduced drag and better speed • Angled brush cavities and micro guide for maximum track contact • Includes mounting screw and washer • Smooth lane changes and stable handling • Designed and manufactured in Germany Specifications: Brand: SlotInvasion Material: Fiberglass-reinforced Polyamide Compatibility: Slot.it, FLY, Pioneer-Legends, Racer\/Sideways, Policar, 3A3D Track Type: Carrera® 1\/32–1\/24 and routed wood tracks Includes: Guide, screw, and washer Country of Origin: Germany\u003c\/p\u003e","brand":"Slot Invasion","offers":[{"title":"Default Title","offer_id":46726020399301,"sku":"SI-SLT-SLO","price":4.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p57.webp?v=1786711888"},{"product_id":"slotinvasion-complete-scalextric-slot-cars-guide-conversion-kit","title":"SlotInvasion COMPLETE Scalextric slot cars guide conversion kit","description":"\u003cp\u003eSlotInvasion COMPLETE Scalextric Slot Car Guide Conversion Kit Designed and Manufactured in Germany Upgrade your Scalextric slot cars for professional-grade performance! This SlotInvasion Guide Conversion Kit is engineered specifically for use on Carrera® 1\/32–1\/24 and routed wood tracks, offering smoother cornering, reduced friction, and improved electrical contact.\u003c\/p\u003e\n\u003cp\u003eProduct Features Complete kit – includes guide, aluminum adapter, mounting screw, washer, brass eyelets\/pins, and a pair of long (30mm\/1.18”) tinned copper braids\/brushes Polyamide with fiberglass construction – strong, low-friction, and wear-resistant Precision aluminum adapter fits most modern Scalextric slot cars (also sold separately) Optimized guide blade – correct thickness and length for Carrera® and wood tracks Narrowed mid-section reduces friction contact area by nearly 30% Angled brush installation cavities and micro guide design ensure maximum track contact Enables smoother lane changes and improved handling on high-grip surfaces\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits most modern Scalextric 1\/32 slot cars Designed for Carrera 1\/32–1\/24 and routed wood tracks Professional racers’ choice for analog and club track conversions\u003c\/p\u003e\n\u003cp\u003eWhy Choose OmniSlotBox We’re racers first — with over 50 years in the hobby. Every product we offer is carefully tested and selected to enhance your performance and enjoyment of slot car racing.\u003c\/p\u003e","brand":"Slot Invasion","offers":[{"title":"Default Title","offer_id":46726020464837,"sku":"SILK-SCK a","price":8.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p59.webp?v=1786711893"},{"product_id":"siotinvasion-carrerar-performance-guide-for-132-124-slot-cars-pack-of-5","title":"SIotInvasion Carrera(R) Performance guide for 1\/32 \u0026 1\/24 slot cars- Pack of 5","description":"\u003cp\u003eSlotInvasion Carrera® Performance Guide for 1\/32 \u0026amp; 1\/24 Slot Cars – Pack of 5 Designed and Manufactured in Germany Take your Carrera® cars to the next level with the SlotInvasion Performance Guide, engineered for smoother handling, tighter lock-in, and flawless\u003c\/p\u003e\n\u003cp\u003eProduct Features NEW! Pack of 5 high-performance guides (flags\/keels) Optimized geometry – refined depth, length, and width for maximum stability Heavy-duty glass-fiber polyamide construction – ultra-strong, low-friction, and wear-resistant Positive locking head – tight fit that stays in place, won’t pull out by hand Perfected lock-head geometry ensures 99.9%\u003c\/p\u003e\n\u003cp\u003eSee Harry Wise’s Home Racing World feature video: Watch on YouTube\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eFits: Carrera Exclusive (2006+), Evolution (2007+), Digital 1\/32 \u0026amp; 1\/24 (all years) Does not fit Carrera First, Go, Digital 1\/43, or other brands\u003c\/p\u003e\n\u003cp\u003eIncludes 5 Performance Guides (flags) Made in Germany\u003c\/p\u003e\n\u003cp\u003eFun Note Warning: May cause weight gain — less derailing = less walking = more racing!\u003c\/p\u003e\n\u003cp\u003eWhy Choose OmniSlotBox With over 50 years in the hobby, we hand-pick and test every SlotInvasion product we sell. Our mission is simple — keep slot racing fast, fun, and reliable for every driver.\u003c\/p\u003e","brand":"Slot Invasion","offers":[{"title":"Default Title","offer_id":46726020497605,"sku":"SI-Guide-Red","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p60.webp?v=1786711895"},{"product_id":"slotinvasion-slot-dot-it-high-performance-guide-for-carrera-and-wood-tracks","title":"SlotInvasion BRM and RevoSlot, high performance guide for Carrera \u0026 Wood Tracks","description":"\u003cp\u003eSlotInvasion BRM and RevoSlot, high performance guide for Carrera \u0026amp; Wood Tracks– for Carrera® \u0026amp; Wood Tracks | Made in Germany Features: • NEW high-performance guide for Slot.it, FLY, Pioneer-Legends, Racer\/Sideways, Policar \u0026amp; most 3A3D slot cars • Designed for Carrera® 1\/32–1\/24 and routed wood tracks • Polyamide with fiberglass construction – strong, smooth, and long-lasting • Optimized blade thickness and length for Carrera® and wood geometry • Narrowed mid-section (≈30% less friction) for reduced drag and better speed • Angled brush cavities and micro guide for maximum track contact • Includes mounting screw and washer • Smooth lane changes and stable handling • Designed and manufactured in Germany Specifications: Brand: SlotInvasion Material: Fiberglass-reinforced Polyamide Compatibility: Slot.it, FLY, Pioneer-Legends, Racer\/Sideways, Policar, 3A3D Track Type: Carrera® 1\/32–1\/24 and routed wood tracks Includes: Guide, screw, and washer Country of Origin: Germany\u003c\/p\u003e","brand":"Slot Invasion","offers":[{"title":"Default Title","offer_id":46726020530373,"sku":"SLT-SLT-IT-HGH","price":4.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p61.webp?v=1786711896"},{"product_id":"sloting-plus-lubboil-no6-special-lubricant-capillarity","title":"Liquid – Sloting Plus LUBBOIL No.6 Special Lubricant Capillarity","description":"\u003cp\u003eSloting Plus Special Lubricant LUBBOIL No.6 Capillarity. Capillary lubricant - for general lubrication - Green Lime color - 15 ml - bag with 1 unit LUBBOIL Nº 6 CAPILLARITY is a multi-application lubricating fluid that acts by capillary action specially developed to dissolve dirt, lubricate moving parts and protect metal parts from corrosion. It contains a high range of liquid lubricants, penetrating additives, anticorrosives, antioxidants and non-chlorinated solvents. It does not contain silicones and is suitable for plastic mechanisms. APPLICATIONS: Indicated for any mechanism that requires a product that actively combines the 3 actions described above, cleaning, lubricating and protecting. PROPERTIES: Penetrates quickly between the parts to be lubricated by the action of capillarity, being very suitable in micro-mechanisms, moving parts and mechanical elements with little clearance between them. Protects against the action of humidity and the elements, and prevents and avoids the oxidation of the treated elements. VERY IMPORTANT: KEEP AWAY FROM CHILDRENS. ATTENTION: IT IS NOT BIODEGRADABLE. TREAT IT AS A RECYCLABLE PRODUCT. NOTE: USE A VERY LITTLE QUANTITY OF PRODUCT.\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726020563141,"sku":"SLT-PLS-LBB-NO","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p62.webp?v=1786711898"},{"product_id":"slotit-19mm-diameter-x-10mm-wide-p6-compound-rubber-slick-tires-set-of-4-package","title":"Tires – Slot.it 19mm Dia. x 10mm wide P6 Compound rubber slick tires – 4-Pack \/","description":"\u003cp\u003eSlot.it 1\/32 P6 Compound Slick Tires – 19mm x 10mm (4-Pack) Consistent Grip. Clean Track. Serious Speed. Upgrade your grip with this set of four Slot.it P6 compound slick tires, sized 19mm diameter x 10mm wide — ideal for high-performance tuning on a variety of 1\/32 slot cars. These P6 tires are Slot.it’s recommended compound for Scalextric Sport, Carrera, and smooth wood track surfaces, delivering reliable traction with long-lasting durability. well suited to rear tire replacements on Slot.it, NSR, and other race-grade 1\/32 cars that use standard 15.8mm to 16.5mm wheels.\u003c\/p\u003e\n\u003cp\u003ePerformance Specs Quantity: Set of 4 tires Diameter: 19mm Width: 10mm Material: P6 compound rubber Fitment: Slot.it aluminum wheels \u0026amp; compatible third-party wheels\u003c\/p\u003e\n\u003cp\u003eCompound Reference Guide Slot.it offers several rubber compounds for tuning across track types: CompoundRecommended Use P1 \/ P2 \/ P3 Smooth plastic or smooth routed wood tracks (non-abrasive) P4 \/ P5 Abrasive Ninco plastic tracks P6Best for Scalextric Sport, Carrera, and routed wood tracksS1 \/ S2 Non-abrasive tracks, low dust pickup Z0 Front wheels only F15 \/ F22 \/ F30 Universal front tires for all conditions\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with most Slot.it 15.8mm or 16.5mm wheels Direct fit for Slot.it, NSR, and similar 1\/32 performance cars Ideal for analog and digital 1\/32 track systems P6 compound especially effective on Carrera and Scalextric Sport tracks with a clean surface\u003c\/p\u003e\n\u003cp\u003eOrdering more items? Click “Add to Cart” and Request Total for combined\u003c\/p\u003e\n\u003cp\u003eInternational\u003c\/p\u003e\n\u003cp\u003eAbout OmniSlotBox I'm Jim Cunningham, founder of OmniSlotBox and the SlotCarClubhouse in Sherwood, Arkansas. I’ve been racing and tuning slot cars for over 50 years, and I’m here to help you go faster, smoother, and have more fun doing it. You’re welcome to race with us — book your visit at SlotCarClubhouse.com. We also travel and love meeting racers wherever we go. Thanks for supporting small hobby businesses. With OmniSlotBox, you don’t just buy tires — you get performance. Happy Racing! ~ Jim Cunningham\u003c\/p\u003e","brand":"SlotCar Supply","offers":[{"title":"Default Title","offer_id":46726021152965,"sku":"PT24","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p76.webp?v=1786711923"},{"product_id":"382818657-skidlid-stickers-1-25-x-5-75-highest-quality-print-not-a-reproduction-2-ea","title":"SkidLid stickers, 1.25 x 5.75\" Highest quality print, not a reproduction. 2 ea","description":"\u003cp\u003eSkidLid stickers, 1.25 x 5.75\" Highest quality print, not a reproduction. 2 ea. Highest quality print, not a reproduction. 1977 dealer issue. Good adhesive backed. RARE I have hundreds of similar items in my eBay store. To combine\u003c\/p\u003e","brand":"OmniSlotBox","offers":[{"title":"Default Title","offer_id":46726021284037,"sku":"NEyONg7MxQopZ427","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p80.jpg?v=1786711930"},{"product_id":"382819264-simco-super-adjustable-x-700-chassis-for-russkit-33-kemtron-x-503-all-36d","title":"Chassis, Simco Super Adjustable X-700 for Russkit 33, Kemtron X-503 \u0026 all 36D","description":"\u003cp\u003eSimco Super Adjustable X-700 Chassis – Vintage NOS (1965) Fits Russkit 33, Kemtron X-503, \u0026amp; All 36D Motors\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cp\u003eA classic Simco Super Adjustable X-700 chassis, designed in the golden age of slot car racing. Ideal for 1\/24 vintage builds and compatible with a wide range of 36D motors, including the Russkit 33 and Kemtron X-503. Model: Simco X-700 Type: Inline brass chassis Wheelbase: Adjustable from 3.5\" to 4.5\" Motor Fit: All 36D motors – Russkit 33, Kemtron X-503, Pittman, etc. Era: 1960s Condition: New old stock – sealed in original 1965 vintage packaging Construction: Simple, sturdy, and lightweight stamped brass A versatile and durable design from the peak of slot car history — great for restorers, racers, or collectors.\u003c\/p\u003e","brand":"OmniSlotBox","offers":[{"title":"Default Title","offer_id":46726021316805,"sku":"mAO7pZqy1kZPaXDl","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p81.jpg?v=1786711931"},{"product_id":"silver-plated-copper-guide-clips-pr-u28","title":"Guide Clips – U28 Silver-Plated Copper – Pair","description":"\u003cp\u003e\u003cstrong\u003eU28 Silver-Plated Copper Guide Clips\u003c\/strong\u003e for compatible low-profile slot car guides.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart:\u003c\/strong\u003e U28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Silver-plated copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e One pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e Guide-to-braid electrical connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDesigned to provide a secure mechanical connection and good electrical conductivity on compatible guide assemblies. Confirm guide fitment before ordering.\u003c\/p\u003e","brand":"JK","offers":[{"title":"Default Title","offer_id":46726021349573,"sku":"CUT-BRS-GD-CLP","price":1.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p82.webp?v=1786711933"},{"product_id":"motor-lighting-ii-40-000rpm-larger-cooling-holes-h-and-r-racing-hrml2","title":"Motor – SCALEAUTO Tech 3 Motor Series Motor – 30,000 RPM, 254 g-cm torque","description":"\u003cp\u003eScaleauto Tech 3 Series Motor – 30,000 RPM \/ 254 g-cm Torque High RPM Power That Plays Nice With Home Setups The Scaleauto Tech 3 motor delivers serious speed while remaining compatible with typical home racing power supplies — no need for a high-amp commercial setup to enjoy high-performance results.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cp\u003eAt a Glance: RPM: 30,000 @ 12V Torque: 254 g-cm Max Current: 370 mA Shaft: 2mm plain Fitment: Standard 1\/32 and 1\/24 motor pods well suited to analog club racing or high-speed tuning of your home slot car — especially where lower current draw is important (Carrera wall pack compatible!).\u003c\/p\u003e\n\u003cp\u003eUse \u0026amp; Compatibility: Plug-and-play with Scaleauto, Slot.it, NSR, and other standard-size pod systems Recommended for analog tracks running 12–15V Works well on foam or urethane tire setups Excellent upgrade for home sets where magnet-free grip and high RPM response are desired\u003c\/p\u003e\n\u003cp\u003eCommunity-Backed Performance I’m Jim Cunningham, founder of OmniSlotBox and host of the SlotCarClubhouse in Sherwood, Arkansas. You're welcome to visit — just make an appointment at\u003c\/p\u003e\n\u003cp\u003eCombined\u003c\/p\u003e\n\u003cp\u003eHappy Racing! ~ Jim Cunningham\u003c\/p\u003e","brand":"SlotCar Supply","offers":[{"title":"Default Title","offer_id":46726021710021,"sku":"MTR-LGH-II-40","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p92.webp?v=1786711949"},{"product_id":"rear-wheels-for-jk-direct-drive-cars-2mm-axle-720-od-3-dot-75-wide-050-allen-rr-whl-for-jk","title":"Tires – SCALEAUTO SC-2009 ProComp 1\/32 Foam Rubber Tires 20.5 x 11mm 3\/32\" Axle","description":"\u003cp\u003eSCALEAUTO SC-2009 ProComp 1\/32 Foam Rubber Tires 20.5 x 11mm • For 3\/32\" Axles • High Grip Sponge Compound\u003c\/p\u003e\n\u003ch3\u003eRace-Proven Performance\u003c\/h3\u003e\n\u003cp\u003eUpgrade If you're chasing consistency, grip, and faster lap times, these are the tires for you. The SCALEAUTO SC-2009 ProComp foam rubber tires deliver serious performance for 1\/32 scale racing. Whether you're prepping for a big event or just want to upgrade your garage racers, you'll love the results. These wheels are superlight, incredibly responsive, and made to shine on clean or prepped track surfaces. Apply a treatment like Track Honey, and they’ll blow you away.\u003c\/p\u003e\n\u003cp\u003ePerfect Fit Direct upgrade for most ScaleAuto, NSR, and Slot.it 1\/32 slot cars Compatible with 3\/32\" axles (2.38mm) Accepts most stock wheel inserts\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eTire Diameter: 20.5mm Tire Width: 11mm Wheel Diameter: 15mm Axle Fit: 3\/32\" (2.38mm) Mounting: M3 set screw (included) Quantity: 2 wheels\/tires (pre-mounted) Material: Hard, high-grip ProComp-3 sponge rubber Use: Designed for wooden tracks or high-grip surfaces, excellent for endurance racing\u003c\/p\u003e\n\u003cp\u003eWhy Racers Love Them Durable and long-lasting foam Lightweight aluminum wheels Outstanding grip and control Easy to tune and compatible with popular brands Run best with track treatment for maximum performance\u003c\/p\u003e\n\u003cp\u003eCombined\u003c\/p\u003e","brand":"SlotCar Supply","offers":[{"title":"Default Title","offer_id":46726021939397,"sku":"SC-2009","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p98.webp?v=1786711960"},{"product_id":"scaleauto-sc-2007-procomp-132-foam-rubber-tires","title":"Tires – SCALEAUTO SC-2007 ProComp 1\/32 Foam Rubber Tires","description":"\u003cp\u003eSCALEAUTO SC-2007 ProComp 1\/32 Foam Rubber Tires 20.5 x 11mm • For 3\/32\" Axles • High Grip Sponge Compound\u003c\/p\u003e\n\u003ch3\u003eRace-Proven Performance\u003c\/h3\u003e\n\u003cp\u003eUpgrade If you're chasing consistency, grip, and faster lap times, these are the tires for you. The SCALEAUTO SC-2009 ProComp foam rubber tires deliver serious performance for 1\/32 scale racing. Whether you're prepping for a big event or just want to upgrade your garage racers, you'll love the results. These wheels are superlight, incredibly responsive, and made to shine on clean or prepped track surfaces. Apply a treatment like Track Honey, and they’ll blow you away.\u003c\/p\u003e\n\u003cp\u003ePerfect Fit Direct upgrade for most ScaleAuto, NSR, and Slot.it 1\/32 slot cars Compatible with 3\/32\" axles (2.38mm) Accepts most stock wheel inserts\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eTire Diameter: 20.5mm Tire Width: 11mm Wheel Diameter: 15mm Axle Fit: 3\/32\" (2.38mm) Mounting: M3 set screw (included) Quantity: 2 wheels\/tires (pre-mounted) Material: Soft, high-grip ProComp-3 sponge rubber Use: Designed for wooden tracks or high-grip surfaces, excellent for endurance racing\u003c\/p\u003e\n\u003cp\u003eWhy Racers Love Them Durable and long-lasting foam Lightweight aluminum wheels Outstanding grip and control Easy to tune and compatible with popular brands Run best with track treatment for maximum performance\u003c\/p\u003e\n\u003cp\u003eCombined\u003c\/p\u003e","brand":"SlotCar Supply","offers":[{"title":"Default Title","offer_id":46726021972165,"sku":"SCL-SC-200-PRC","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p99.webp?v=1786711961"},{"product_id":"wall-edge-channel-to-finish-wall-tops-and-connect-wall-sections","title":"Track Wall Trim – Rubber Top Edge Channel – 10 ft Roll","description":"\u003cp\u003e\u003cstrong\u003eFlexible rubber channel for finishing, aligning and reinforcing the top edge of slot car track walls and barriers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis \u003cstrong\u003erubber wall-top channel\u003c\/strong\u003e slips over thin wall material to create a cleaner finished edge while helping adjoining wall sections stay aligned.\u003c\/p\u003e\n\n\u003cp\u003eIt works especially well with thin corrugated plastic, Masonite and similar materials commonly used for home, club and scenic slot car track barriers.\u003c\/p\u003e\n\n\u003ch3\u003eKey Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Track Walls\u003c\/strong\u003e – covers exposed wall edges for a cleaner appearance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlign Wall Sections\u003c\/strong\u003e – helps adjoining panels remain even at seams\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforce Thin Barriers\u003c\/strong\u003e – adds support along the top edge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCover Sharp Edges\u003c\/strong\u003e – provides a softer finished surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScenic Track Construction\u003c\/strong\u003e – useful for permanent home and club raceways\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Flexible rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width:\u003c\/strong\u003e Approximately 7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height:\u003c\/strong\u003e Approximately 10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Thickness:\u003c\/strong\u003e Up to approximately 1.5 mm \/ 1\/16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Approximately 3 meters \/ 10 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\n\u003cp\u003ePress the channel over the top edge of the wall material and work it into position along the barrier. At adjoining wall sections, the continuous channel can help keep the tops aligned while providing a more finished appearance.\u003c\/p\u003e\n\n\u003cp\u003eMeasure your wall material before ordering to confirm that its thickness is compatible with the approximately 1.5 mm channel opening.\u003c\/p\u003e\n\n\u003ch3\u003eJim's Racer Perspective\u003c\/h3\u003e\n\n\u003cp\u003eTrack walls work better when they are neat, strong and easy to maintain. This simple trim gives thin barrier material a much more finished appearance while also helping keep wall sections lined up.\u003c\/p\u003e","brand":"OmniSlotBox","offers":[{"title":"Default Title","offer_id":46726022070469,"sku":"WLL-DG-CHN","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/l2.webp?v=1786711966"},{"product_id":"rms-124-cm-carrera-124-12-14-volt-tuning-motor-drop-in-wpinion-leads","title":"Motor RMS-124-CM Carrera 1\/24 12-14 Volt Tuning DROP IN w\/pinion \u0026 leads","description":"\u003cp\u003eRMS-124-CM High-Performance Motor for Carrera 1\/24 – Plug \u0026amp; Play Upgrade Includes Pinion Gear \u0026amp; Wiring Harness – No Soldering Required! Product Overview Unleash the full potential of your Carrera 1\/24 slot cars with this drop-in RMS-124-CM motor upgrade. Designed for seamless compatibility with both analog (12–16V) and Carrera Digital (D124\/D132) systems, this high-torque motor transforms your 1\/24 models into fast, responsive race machines—without needing extra tools, adapters, or modifications. Use of this motor lets your 1\/24 cars run at the same voltage and pace as your 1\/32 cars. No more switching from 14.5V for 1\/32 and 18V for 1\/24—run them all together at a single, optimized voltage setting. The motor’s greater efficiency also reduces current draw, allowing more cars (often 5–6) to run on a stock Carrera 1\/24 power supply without overloading it. Key Features Plug \u0026amp; Play Installation – Comes pre-installed with pinion and wiring harness. No soldering needed. Compatible with Stock Carrera Power Systems – Works with standard analog or digital packs. Low-Amperage, High-Output Design – Run more cars with the same power supply. 12V Rated, Handles Up to 24V – Incredible flexibility for variable power setups. No Chassis Modifications Required – Uses stock mounting and hardware. Massive Performance – Rated 30,000 RPM at 12V (compare to Carrera’s 24K at 18V). Ideal Power Range – Best results between 12–14V. Use Control Unit settings or external power supply to fine-tune. Great for Drift or Grip – Excellent torque for both magnet and no-magnet setups. Whether you’re racing on a home layout or building up a club fleet, this motor is a proven performance booster for Carrera 1\/24 cars—without compromising reliability or requiring costly mods.\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726022136005,"sku":"RMS-124a","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L3.webp?v=1786711969"},{"product_id":"rear-wheels-for-jk-anglewinder-cars-0-dot-720-d-0-dot-400-h-0-dot-600-w-3-slash-32-a-recessed-l-natural-rubber","title":"Wheels – for JK Direct Drive cars 2Mm axle.720 OD 3.75 wide.050 allen","description":"\u003cp\u003eRear Wheels for JK Direct Drive 1\/32 Slot Cars Precision-Machined Aluminum Hubs – 2mm Axle – Set Screw Mount These are the exact rear wheels used on our JK Direct Drive (DD) 1\/32 cars — engineered for gearless performance, minimal rolling resistance, and maximum durability.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eOuter Diameter: 0.720\" Tread Width: 0.375\" (3\/8\") Axle Size: 2mm (for JK DD and similar setups) Material: Lightweight aluminum hub Tire Compound: Medium natural rubber Mounting: Set screw style with.050\" Allen head Sold as a pair (2 wheels\/tires)\u003c\/p\u003e\n\u003cp\u003eDesigned specifically for gearless JK Direct Drive cars, these are also ideal for racers seeking high-efficiency wheels for foam or rubber tire applications on 2mm axles.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eOptimized for Direct Drive motors — extremely low rotating mass Recessed hub for clean body clearance and weight savings Rubber tires may be glued and trued as desired Set screw ensures secure grip on 2mm axle Built for use on routed wood and analog Carrera tracks\u003c\/p\u003e","brand":"JK","offers":[{"title":"Default Title","offer_id":46726022267077,"sku":"T3M2W9EL","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L11.webp?v=1786711975"},{"product_id":"rear-wheels-for-jk-anglewinder-cars-0720d-0400h-0600w-332a-recessed-l-natural-rubber","title":"Wheels – for JK Anglewinder cars 0.720\"D 0.400\"H 0.600\"W 3\/32\"A Recessed","description":"\u003cp\u003eRear Wheels for JK 1\/32 Anglewinder Chassis T206RL – Natural Rubber – Recessed “L” Hub – 3\/32\" Axle Upgrade your JK Anglewinder 1\/32 slot car with this premium pair of natural rubber rear wheels designed for traction, balance, and consistent performance.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eOutside Diameter: 0.720\" Tread Height: 0.400\" Overall Width: 0.600\" Axle Fit: 3\/32\" Hub Type: Recessed “L” Style Tire Compound: Natural Rubber Part Number: T206RL Sold as a pair (2 wheels\/tires)\u003c\/p\u003e\n\u003cp\u003ePerfect fit for JK Cheetah Anglewinder and similar 1\/32 scale steel chassis cars. These natural rubber tires are ideal for foam-tire club racing, non-magnet analog setups, and CARS Club-legal builds. Engineered for balance and grip on both routed wood and analog Carrera tracks.\u003c\/p\u003e\n\u003ch3\u003eRecommended Use\u003c\/h3\u003e\n\u003cp\u003eCompatible with JK Cheetah (JKC21) chassis Best used on prepared surfaces (lightly treated track with Track Honey or similar) Can be glued and trued for maximum performance\u003c\/p\u003e","brand":"JK","offers":[{"title":"Default Title","offer_id":46726022299845,"sku":"T206RL","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L12.webp?v=1786711977"},{"product_id":"rear-wheels-for-jk-anglewinder-cars-0-dot-720-d-0-dot-400-h-0-dot-600-w-3-slash-32-a-recessed-l-natural-rubber-rr-whl-for-jk","title":"Wheels – for JK Anglewinder cars 0.720\"D 0.400\"H 0.600\"W 3\/32\"A Recessed","description":"\u003cp\u003eRear Wheels for JK 1\/32 Anglewinder Chassis T205T – Chemically Treated Natural Rubber – Recessed “L” Hub – 3\/32\" Axle _ Treated fir better grip. Upgrade your JK Anglewinder 1\/32 slot car with this premium pair of TREATED natural rubber rear wheels designed for traction, balance, and consistent performance.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eOutside Diameter: 0.720\" Tread Height: 0.400\" Overall Width: 0.600\" Axle Fit: 3\/32\" Hub Type: Recessed “L” Style Tire Compound: Natural Rubber Part Number: T206RL Sold as a pair (2 wheels\/tires)\u003c\/p\u003e\n\u003cp\u003ePerfect fit for JK Cheetah Anglewinder and similar 1\/32 scale steel chassis cars. These TREATED natural rubber tires can provide more grip for foam-tire club racing, non-magnet analog setups, and CARS Club-legal builds. Engineered for balance and grip on both routed wood and analog Carrera tracks.\u003c\/p\u003e\n\u003ch3\u003eRecommended Use\u003c\/h3\u003e\n\u003cp\u003eCompatible with JK Cheetah (JKC21) chassis Best used on prepared surfaces (lightly treated track with Track Honey or similar) Can be glued and trued for maximum performance\u003c\/p\u003e","brand":"JK","offers":[{"title":"Default Title","offer_id":46726022332613,"sku":"T205T","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L13.webp?v=1786711978"},{"product_id":"pse-rear-wheels-0770d-0600h-18a-full-big-hub-tuna","title":"Wheels – PSE rear wheels 0.770\"D 0.600\"H 1\/8\"A Full Big Hub Tuna","description":"\u003cp\u003ePSE Rear Wheels – Full Big Hub Tuna Foam – 0.770\" Dia x 0.600\" Wide x 1\/8\" Axle Vintage NOS – Very Soft \u0026amp; Grippy! Classic New Old Stock (NOS) foam rear tires from PSE—well suited to racers looking for soft, high-grip performance with full-width stability. These wheels feature a large hub design for consistent contact and better support under high loads.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eDiameter: 0.770\" Width: 0.600\" Axle: 1\/8\" Hub: Full width aluminum “Big Hub” Set screw:.050 hex Compound: Super soft Tuna foam – legendary grip on wood and plastic tracks These are vintage performance tires —hard to find and still sealed up fresh!\u003c\/p\u003e\n\u003cp\u003eFrom Jim: These PSE wheels were among the best in their day—and they still perform! Soft foam grips beautifully, and the full-width hubs help reduce chatter and deformation. Grab a set while they last—they’re true slot car gold for vintage and retro-class builds. Visit me anytime at the SlotcarClubhouse in Sherwood, Arkansas—or shoot me a message with questions. ~ Jim Cunningham\u003c\/p\u003e\n\u003cp\u003eIf the\u003c\/p\u003e","brand":"OmniSlotBox","offers":[{"title":"Default Title","offer_id":46726022693061,"sku":"PSE-71025","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L19.webp?v=1786711986"},{"product_id":"professor-motor-pmtr1049-set-of-3-brass-solder-on-terminals-for-direct-connection-to-carrera-terminal-track","title":"Controller – Professor Motor PMTR1049 Set of 3 brass solder-on terminals for direct","description":"\u003cp\u003eProfessor Motor PMTR1049 Set of 3 brass solder-on terminals for direct connection to Carrera terminal track Set of 3 brass solder-on terminals for direct connection to Carrera brand home set terminal track. May be used with any brand of slot car controller or any brand of power supply. Includes color coded heat shrink tubing to cover the barrel section of the terminal after soldering.\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726023053509,"sku":"PMTR1049","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L22.webp?v=1786711990"},{"product_id":"professor-motor-4-40-thread-x-564-2mm-length-hollow-setscrews-0050-127mm-hex-drive","title":"Hardware – Professor Motor #4-40 Thread x 5\/64\" (2mm) Length HOLLOW Setscrews","description":"\u003cp\u003eProfessor Motor #4-40 Thread x 5\/64\" (2mm) Length HOLLOW Setscrews - 0.050\" (1.27mm) Hex Drive - SUPER TOUGH Heat Treated Alloy Steel Material - Black Oxide Coating - 10 setscrews \/ package Solves the issue that on some NSR cars that the standard setscrew rubs on the frame. 0.050\" Allen Wrench may be used in either end of this setscrew - the hex is broached all the way through Direct replacement applications - NSR 1\/32 Cars and JK \/ Parma \/ Slick 7 \/ Koford \/ Champion and all other brands of Commercial Slot Racing Products Greatly reduces imbalance created with conventional setscrews as used in gears and wheels and substantially lighter overall\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726023119045,"sku":"PRF-MTR-4-40","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L6.webp?v=1786711993"},{"product_id":"pro-track-silicone-coated-foam-rubber-tires-retro-size-332-237mm","title":"Tires – Pro-Track Silicone Coated Foam Rubber Tires – RETRO SIZE ! – 3\/32\"","description":"\u003cp\u003ePro-Track Silicone Coated Foam Rubber Tires - RETRO SIZE ! - 3\/32\" (2.37mm) Axle x 0.815\" (20.7mm) Diameter x 0.800\" (20.3mm) Wide - Custom Made for Professor Motor by Pro Track - Small diameter hub for best grip - Setscrew aluminum rims with 0.050\" (1.27mm) Hex Setscrews OLD Part No. PT815s332\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726023184581,"sku":"PRO-TRC-SLC-CTD2","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L8.webp?v=1786711997"},{"product_id":"pro-track-silicone-coated-foam-rubber-daytona-stockers-124-tires-0850-216mm","title":"Tires – Pro-Track SILICONE COATED Foam Rubber \"Daytona Stockers\" 1\/24 Tires","description":"\u003cp\u003ePro-Track SILICONE COATED Foam Rubber \"Daytona Stockers\" 1\/24 Tires - 0.850\" (21.6mm) diameter x 0.800\" (20.3mm) wide - for 1\/8\" (3.2mm) axle - setscrew aluminum rims\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726023217349,"sku":"PRO-TRC-SLC-CTD","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L23.webp?v=1786711998"},{"product_id":"pro-track-124-scale-rear-tires-0765-for-332-axle-fish-rubber","title":"Tires – Pro-Track 1\/24 SCALE Rear Tires 0.765\" for 3.32 axle -Fish Rubber","description":"\u003cp\u003ePro-Track 1\/24 SCALE Rear Tires 0.765\" x 0.900\" (22.9mm tall x 16.5mm wide) 3\/32\" Axle Magnesium Hub NATURAL (Fish) Rubber for 3\/32\" (2.37mm) Axle 0.400\" Diameter (10.2mm) FULL Width Hubs\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726023282885,"sku":"PRO-TRC-289","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L25.webp?v=1786712002"},{"product_id":"pro-track-124-scale-rear-tires-78-x-0910-18-axle","title":"Tires – Pro-Track 1\/24 SCALE Rear Tires 7\/8\" x 0.910\" 1\/8\" Axle","description":"\u003cp\u003ePro-Track 1\/24 Rear Tires – Stock Car Size 7\/8\" x 0.910\" | 1\/8\" Axle | Fish Rubber | Standard Aluminum Hubs These Pro-Track 1\/24 scale rear tires are well suited to stock car builds, vintage restorations, and foam tire racing on wood or treated Carrera tracks. Built with natural \"fish\" rubber for excellent grip and long wear, they're mounted on precision-machined 1\/2\" aluminum rims for optimal balance and durability.\u003c\/p\u003e\n\u003cp\u003eKey Specifications Tire Diameter: 7\/8\" (22.2mm) Tire Width: 0.910\" (23.1mm) Axle Size: 1\/8\" (3.2mm) Rubber Type: Natural (Fish) Compound Hub Diameter: 1\/2\" (12.7mm) Hub Material: Lightweight machined aluminum Mounting: Set screw (not included) Scale: 1\/24\u003c\/p\u003e\n\u003ch3\u003eTrack Use\u003c\/h3\u003e\n\u003cp\u003eRecommendations Ideal for: 1\/24 stock car builds, H\u0026amp;R chassis, vintage slot cars Best on: Routed wood tracks and traction-prepped Carrera surfaces Legal for CARS Club 1\/24 foam tire racing classes\u003c\/p\u003e\n\u003cp\u003eCombined\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726023315653,"sku":"PTN114","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L26.webp?v=1786712003"},{"product_id":"pro-track-124-scale-rear-tires-765-x-0900wide-332-axle","title":"Tires – Pro-Track 1\/24 SCALE Rear Tires.765\" x 0.900\"wide 3\/32\" Axle","description":"\u003cp\u003ePro-Track 1\/24 Rear Tires – Natural Rubber – Magnesium Hubs 0.765\" x 0.900\" | 3\/32\" Axle | Fish Rubber | Full-Width 10.2mm Magnesium Hubs These Pro-Track rear tires are a lightweight performance upgrade for 1\/24 scale slot cars running on wood or treated plastic tracks. Built with natural \"fish\" rubber for exceptional grip and longevity, they're mounted on full-width magnesium hubs for ultra-low rotating mass — a favorite among serious racers.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eTire Diameter: 0.765\" (22.9mm) Tire Width: 0.900\" (16.5mm) Axle Size: 3\/32\" (2.37mm) Rubber Compound: Natural Fish Rubber Hub Material: Magnesium Hub Diameter: 0.400\" (10.2mm), full-width Mounting: Set screw (0.050\") Scale: 1\/24\u003c\/p\u003e\n\u003cp\u003ePerformance \u0026amp; Use Ideal for: High-performance 1\/24 cars using 3\/32\" axles Compatible with many modern flexi chassis, scratchbuilt frames, and club-legal builds Performs best on routed wood tracks or treated Carrera layouts Legal for CARS Club 1\/24 foam tire racing classes\u003c\/p\u003e\n\u003cp\u003eCombined\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726023348421,"sku":"PT289","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L27.webp?v=1786712004"},{"product_id":"paul-gage-ptg-211626xxd-handmade-urethane-slot-car-tires-upgrade-performance-and-durability-1pair","title":"Tires – Paul Gage PTG-211626XXD Urethane 1\/32 Slot Car Tires – . 1pair","description":"\u003cp\u003ePaul Gage PTG-211626XXD Urethane 1:32 Slot Car Tires – 1 Pair Upgrade your traction, durability, and consistency. Race-proven performance with easy tuning. The Paul Gage PTG-211626XXD tires are made from a high-performance urethane polymer, offering the best traits of both rubber and silicone — but without their limitations. These are not rubber and not silicone, but a durable, high-traction compound that’s easy to true and built to last.\u003c\/p\u003e\n\u003cp\u003eFits These Cars \u0026amp; Wheels: Carrera 1\/32: Audi R18 TDI Decon Monza Nissan GT-R GT500 BMW M3 GT2 (Always confirm wheel size and fitment before installing)\u003c\/p\u003e\n\u003cp\u003eWhy These Tires Are Better: Durable polymer compound – won’t dry out or crack like rubber Grips like silicone, but doesn’t attract as much dust or grime Consistent performance – delivers race-winning traction lap after lap Lasts the life of the car – no need to replace worn-out tires constantly Optional to true – but they true easily if needed (huge benefit over silicone) Recommended for rear use only – front grip is not desirable in most slot car setups These tires are required for competitive racing in our local CARS club and have been proven on wood, Carrera, and Scalextric tracks. They're ideal for tuners and racers looking for consistent performance and low maintenance.\u003c\/p\u003e\n\u003cp\u003eMaterial Comparison: FeatureRubberSilicone Paul Gage Urethane GripMediumVery High High, consistent DurabilityLow–MediumVery High High (lifetime use) Easy to TrueYes\u003c\/p\u003e\n\u003cp\u003eNo\u003c\/p\u003e\n\u003cp\u003eYes Dust PickupModerateYes Low Ideal UseGeneral Smooth, clean trackAll surfaces, racing\u003c\/p\u003e","brand":"Paul Gage","offers":[{"title":"Default Title","offer_id":46726023479493,"sku":"PL-GG-PTG-211","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L31.webp?v=1786712010"},{"product_id":"paul-gage-ptg-20125lmxp-handmade-urethane-slot-car-tires-upgrade-performance-and-durability-1pair","title":"Tires – Paul Gage PTG-20128LMXD Urethane 1\/32 Slot Car Tires – . 1pair","description":"\u003cp\u003ePaul Gage PTG-20128LMXD Urethane 1:32 Slot Car Tires – 1 Pair Upgrade your performance and durability with these premium urethane slot car tires. The PTG-20128LMXD tires are ideal replacements for select Carrera 1\/32 cars and are required for CARS club races. These are not rubber, and not silicone — they're a proprietary urethane polymer that offers silicone-like grip, longer life, and easy truing, which is critical when wheels and axles aren’t perfectly true. Recommended Fitment: Carrera BMW M1 Procar Carrera Ford Capri RS 3100 Carrera Ferrari FXX Carrera Ford Mustang GTY Recommended for rear wheels only — added grip up front is typically a disadvantage. Why These Tires Outperform Stock \u0026amp; Silicone: Polymer Urethane compound – high grip with consistent wear characteristics Easy to true – solves issues with uneven axles and wheels Durable – lasts the life of most cars Reliable grip – no fall-off like aging stock rubber Low dust pickup – cleaner than silicone on most surfaces Material Comparison Table: FeatureRubberSilicone Paul Gage Urethane GripMediumVery High High, consistent DurabilityLow–MediumVery High High (lifetime use) Easy to TrueYes\u003c\/p\u003e\n\u003cp\u003eNo\u003c\/p\u003e\n\u003cp\u003eYes Dust PickupModerateYes Low Ideal UseGeneral Smooth, clean trackAll surfaces, racing Condition: New Brand: Paul Gage Model: PTG-20128LMXD Category: Toys \u0026amp; Hobbies \u0026gt; Slot Cars \u0026gt; 1\/32 Scale \u0026gt; Tires \u0026amp; Wheels\u003c\/p\u003e","brand":"Paul Gage","offers":[{"title":"Default Title","offer_id":46726023512261,"sku":"PL-GG-PTG-201","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L32.webp?v=1786712011"},{"product_id":"paul-gage-ptg-20126lm-handmade-urethane-slot-car-tires-upgrade-performance-and-durability-1pair","title":"Tires – Paul Gage PTG-20126LM Urethane 1\/32 Slot Car Tires – . 1pair","description":"\u003cp\u003ePaul Gage PTG-20126LM Urethane 1:32 Slot Car Tires – 1 Pair Race-proven traction. Long-lasting durability. Precision fit for consistent performance. Upgrade your 1\/32 scale slot car with Paul Gage PTG-20126LM tires — the performance standard for serious racers. These urethane polymer tires aren’t rubber or silicone — they deliver the durability of silicone with the tunability and ease of rubber, without the downsides of either.\u003c\/p\u003e\n\u003cp\u003eFits These Cars \u0026amp; Wheels: Carrera 1\/32: Ferrari 458 GT2 Ferrari 488 GT3 Mercedes Benz SLS Lamborghini Huracan GT3 FlySlot: Joest Porsche LMP (Confirm sizing for your specific wheels before installing)\u003c\/p\u003e\n\u003cp\u003eWhy These Tires Outperform the Rest: Long-lasting polymer compound – won’t crack or shrink like rubber Grippy like silicone, but easier to clean and handle Easy to true – especially helpful for fixing out-of-round axles or wheels Set-it-and-forget-it performance – well suited to club racers and tuners Ideal rear tires – front grip not recommended on most slot cars Legal and required in CARS Club H\u0026amp;R Series Compatible with Carrera, Scalextric, wood tracks, and more. These tires will often outperform factory rubber or silicone and are engineered to last the life of your car.\u003c\/p\u003e\n\u003cp\u003eMaterial Comparison: FeatureRubberSilicone Paul Gage Urethane GripMediumVery High High, consistent DurabilityLow–MediumVery High High (lifetime use) Easy to TrueYes\u003c\/p\u003e\n\u003cp\u003eNo\u003c\/p\u003e\n\u003cp\u003eYes Dust PickupModerateYes Low Ideal UseGeneral Smooth, clean trackAll surfaces, racing\u003c\/p\u003e","brand":"Paul Gage","offers":[{"title":"Default Title","offer_id":46726023545029,"sku":"PL-GG-PTG-2012","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L33.webp?v=1786712012"},{"product_id":"paul-gage-ptg-20125lm-handmade-urethane-slot-car-tires-upgrade-performance-and-durability-1pair","title":"Tires – Paul Gage PTG-20125LM Urethane 1\/32 Slot Car Tires – . 1pair","description":"\u003cp\u003ePaul Gage PTG-20125LM Urethane 1:32 Slot Car Tires – 1 Pair Upgrade performance and durability with race-proven polymer compound tires. These Paul Gage PTG-20125LM tires are crafted from high-performance urethane polymer — not rubber and not silicone — offering the perfect balance of grip, durability, and truing capability. This compound grips like silicone, but can be trued like rubber — a huge advantage for racers tuning axles and wheels for maximum performance.\u003c\/p\u003e\n\u003cp\u003eFits These Cars \u0026amp; Wheels: Carrera 1\/32: Audi R8 LMS, Corvette C6R, Ferrari F575, Ferrari 458 Road Car, Mercedes AMG GT3 Evo CB Design: 17x8 Classic Steelies NSR GT Series: Porsche, Corvette, Audi POLICAR: 2016 Lotus 72 RACER: Riley \u0026amp; Dallara Daytona, 17x8 Alloy Hubs SCALEXTRIC: New McLaren F1 GTR, Aston Martin GT3, Mercedes Benz AMG, Ford GT, BMW Z4 GT3, Ford Daytona Prototype, Ginetta G60-LT-P1 Scaleauto: \"R\" \u0026amp; \"RS\" Series Sideways: BMW 320 Slot.it: Lola LMP, Audi R18 SCX: F550, C6R, DBR9, 911, DTM, LMP, FXX, F360 THUNDERSLOT: McLaren Elva (Always verify hub diameter and clearance for best fit)\u003c\/p\u003e\n\u003cp\u003eWhy These Tires Are Better: Durable polymer compound – lasts for the life of most slot cars Grips like silicone, but doesn't degrade or pick up as much track dust Easily trued – well suited to correcting out-of-round wheels or axle misalignment Consistent performance – smooth and predictable grip every race Rear tire use recommended – better traction without excessive front-end grip Ideal for competitive racing, club events, or track tuning.\u003c\/p\u003e\n\u003cp\u003eMaterial Comparison: FeatureRubberSilicone Paul Gage Urethane GripMediumVery High High, consistent DurabilityLow–MediumVery High High (lifetime use) Easy to TrueYes\u003c\/p\u003e\n\u003cp\u003eNo\u003c\/p\u003e\n\u003cp\u003eYes Dust PickupModerateYes Low Ideal UseGeneral Smooth, clean trackAll surfaces, racing\u003c\/p\u003e","brand":"Paul Gage","offers":[{"title":"Default Title","offer_id":46726023577797,"sku":"PL-GG-PTG-2011","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L34.webp?v=1786712013"},{"product_id":"124-paul-gage-urethane-slot-car-tires-2pr-pgt-29148-fit-carrera-d124-ford-gt","title":"Tires – 1\/24 PAUL GAGE URETHANE TIRES 2pr PGT-29148 fit Carrera D124 Ford GT","description":"\u003cp\u003ePaul Gage PGT-29148 Urethane Tires – 1\/24 Scale – Fits Carrera D124 Ford GT (2 Pairs) Product Overview Upgrade your Carrera D124 Ford GT with Paul Gage PGT-29148 Urethane Tires. Known for their superior grip and durability, Paul Gage urethanes are a favorite among serious racers. This set includes 2 pairs (4 tires total), precision-molded to fit the Carrera D124 Ford GT wheels. well suited to club racing or home tracks, these tires deliver consistent performance lap after lap. Features \u0026amp; Specifications Brand: Paul Gage Part Number: PGT-29148 Scale: 1\/24 Tire Type: Urethane Fit: Carrera D124 Ford GT Quantity: 2 pairs (4 tires total) Condition: New – factory packaged Why Choose Paul Gage Urethanes?\u003c\/p\u003e\n\u003cp\u003eBetter grip than stock rubber tires\u003c\/p\u003e\n\u003cp\u003eLong-lasting and consistent performance\u003c\/p\u003e\n\u003cp\u003ePrecision-molded for proper fit\u003c\/p\u003e\n\u003cp\u003eTrusted brand among slot car racers\u003c\/p\u003e\n\u003cp\u003eCombined\u003c\/p\u003e\n\u003cp\u003eIf\u003c\/p\u003e","brand":"Paul Gage","offers":[{"title":"Default Title","offer_id":46726023610565,"sku":"1-24-PL-GG","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L35.webp?v=1786712014"},{"product_id":"tires-fit-nsr-gt-cars-with-air-sysytem-rims-one-pair","title":"Tires – Paul Gage PGT-20125LMDF Polymer Tires – NSR GT Cars \/ Air System Rims","description":"\u003cp\u003ePaul Gage PGT-20125LMDF Polymer Tires – NSR GT Cars \/ Air System Rims Race-Proven Performance. Easy Fit. Zero Glue. This high-performance pair of PGT-20125LMDF tires by Paul Gage is specially designed to fit NSR GT cars equipped with Air system rims. Whether you're club racing or refining your home track setup, these tires provide a noticeable upgrade over stock NSR rubber.\u003c\/p\u003e\n\u003cp\u003eWhy Choose Paul Gage Tires? Lower lap times and more consistent grip No dry rot or degradation over time Double-groove design seats firmly in the NSR Air rims Zero glue needed — won’t expand or fly off at high RPM Truable and tunable with standard tire truer Same tread width as stock but ~1.5mm wider at the sidewall Improved sidewall stability = better cornering performance\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eNote On some NSR GT cars, the slightly fatter sidewall may just touch the gear or chassis on the inside edge.\u003c\/p\u003e\n\u003cp\u003eSolution: While spinning the wheel, carefully trim the inner edge with a sharp blade to ensure clearance.\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cp\u003eBrand: Paul Gage Model: PGT-20125LMDF Material: Soft silicone compound Quantity: One pair (2 tires) Fitment: NSR GT cars with Air System rims No glue required\u003c\/p\u003e\n\u003cp\u003eCombined\u003c\/p\u003e\n\u003cp\u003eFrom the Track I’m Jim Cunningham, founder of OmniSlotBox and SlotCarClubhouse in Sherwood, Arkansas. With over 50 years in the hobby, I love helping racers go faster and have more fun. Questions? Just ask. Let’s race! ~ Jim Cunningham\u003c\/p\u003e","brand":"Paul Gage","offers":[{"title":"Default Title","offer_id":46726023643333,"sku":"PGT-20125LMDF","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L36.webp?v=1786712016"},{"product_id":"parma-p673c-116-brass-collarsspacers-4-pcs","title":"Parma P673C 1\/16\" Brass Collars\/Spacers – 4 Pcs","description":"\u003cp\u003eParma P673C – 1\/16\" Brass Collars \/ Wheel Retainers \/ Pin Tubing Collars (4-Pack) Essential Hardware for 1\/24 \u0026amp; 1\/32 Chassis Builders Product Overview These classic Parma P673C 1\/16\" brass collars are staple components for scratchbuilders and restorers. They’re designed for two primary uses: Front wheel retention on 1\/16\" front axles Collars for body-mount pin tubing on brass\/piano-wire chassis If you build, tune, or restore vintage or modern cars, these little collars are indispensable.\u003c\/p\u003e\n\u003cp\u003e4 Features Designed for 1\/16\" front axle retention Perfect collars for pin tubing body mounts Precision-machined brass Reliable, secure set-screw engagement Compatible with most 1\/24 and 1\/32 scratchbuilt chassis 4 collars per pack Technical Details Manufacturer: Parma Part Number: P673C Inner Diameter: 1\/16\" Material: Brass Quantity: 4 Primary Use: Front wheel retainers \u0026amp; body pin-tube collars Why Builders Use These Front wheel spacing and body-mount alignment are crucial to predictable handling. These collars keep your wheels and pin tubes locked right where they belong, race after race. What’s Included (4) Parma P673C 1\/16\" brass collars Packaged for safe shipment\u003c\/p\u003e","brand":"Mid A","offers":[{"title":"Default Title","offer_id":46726023676101,"sku":"P673C","price":1.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L37.webp?v=1786712017"},{"product_id":"parma-516-gear-puller","title":"Tool – Parma 516 Gear Puller – Original Vintage Version – New in Package","description":"\u003cp\u003e\u003cstrong\u003eOriginal Parma 516 gear puller in new, factory-packaged condition.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis is the classic older version of the \u003cstrong\u003eParma 516 Gear Puller\u003c\/strong\u003e, a precision-machined slot car tool designed for removing gears cleanly from motor shafts.\u003c\/p\u003e\n\n\u003cp\u003eThis original Parma design has been discontinued for years and has become increasingly difficult to find in unused condition.\u003c\/p\u003e\n\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Parma\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 516\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Type:\u003c\/strong\u003e Slot Car Gear Puller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersion:\u003c\/strong\u003e Original \/ Older Design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCondition:\u003c\/strong\u003e New in Original Package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus:\u003c\/strong\u003e Discontinued Vintage Tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Racers Value This Version\u003c\/h3\u003e\n\n\u003cp\u003eThe original Parma 516 was a longtime favorite among racers, builders and commercial raceways because of its simple, rigid construction and precise mechanical action.\u003c\/p\u003e\n\n\u003cp\u003eIt is designed to pull press-fit gears from motor shafts while reducing the risk of bending the shaft or damaging the gear compared with improvised removal methods.\u003c\/p\u003e\n\n\u003ch3\u003eJim's Racer Perspective\u003c\/h3\u003e\n\n\u003cp\u003eThis was the gear puller we used at my own slot car raceway, and it remains my personal favorite.\u003c\/p\u003e\n\n\u003cp\u003eI prefer this original Parma design to the later black single-handle Parma\/Champion-style version. The older tool feels more precise and controlled in use and has proven extremely durable over many years of raceway service.\u003c\/p\u003e\n\n\u003ch3\u003eFor the Collector or Working Racer\u003c\/h3\u003e\n\n\u003cp\u003eBecause this example is still \u003cstrong\u003enew in its original package\u003c\/strong\u003e, it is equally suitable for a vintage slot car tool collection or for a racer who wants to put one of Parma's classic workshop tools back into service.\u003c\/p\u003e","brand":"OmniSlotBox","offers":[{"title":"Default Title","offer_id":46726023741637,"sku":"PRM-516-GR-PLL","price":35.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L39.webp?v=1786712020"},{"product_id":"382818864-o-ring-front-tires-1-2-id-3-4-od-tires-soft-new-2-pair","title":"Tires, O-Ring front tires 1\/2\" ID 3\/4\" OD tires. Soft \u0026 new. 2 pair","description":"\u003cp\u003eO-Ring Front Tires – 2 Pairs 1\/2\" Inner Diameter • 3\/4\" Outer Diameter Soft Rubber – New Stock\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cp\u003eA set of two pairs (4 total) soft rubber O-ring front tires — ideal for lightweight slot car builds or replacements on vintage and scratch-built cars. Inner Diameter (ID): 1\/2\" Outer Diameter (OD): 3\/4\" Material: Soft, grippy rubber Quantity: 2 pairs (4 tires total) Condition: New – fresh and flexible These tires are a great fit for 1\/32 and 1\/24 cars that use narrow, low-resistance front rollers or for tuning lightweight builds.\u003c\/p\u003e","brand":"OmniSlotBox","offers":[{"title":"Default Title","offer_id":46726024855749,"sku":"yq509lDkEbVyNM1A","price":2.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L41.jpg?v=1786712057"},{"product_id":"nsr1258-evo-aw-triangular-hard-white-long-can-motor-mount","title":"Motor Mount – NSR1226 EVO2 AW Hard White – Long Can","description":"\u003cp\u003e\u003cstrong\u003eNSR1226 EVO2 Anglewinder Motor Mount\u003c\/strong\u003e in hard white for long-can motors.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e NSR1226\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Anglewinder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e EVO2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompound:\u003c\/strong\u003e Hard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor fitment:\u003c\/strong\u003e Long can\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA stiff motor-pod option for compatible NSR anglewinder chassis.\u003c\/p\u003e","brand":"SlotCar Supply","offers":[{"title":"Default Title","offer_id":46726024888517,"sku":"NSR1226","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L42.webp?v=1786712058"},{"product_id":"nsr-zero-grip-16-x-8-tires-for-16-165-or-17mm-rims-4-tires-package","title":"Tires – NSR Zero Grip 16 x 8 Tires for 16 \/ 16.5 \/ or 17mm Rims – 4 tires \/","description":"\u003cp\u003eNSR Zero Grip Tires – 16 x 8 mm (4 Tires per Package) For 16 mm, 16.5 mm, or 17 mm Rims Upgrade the handling and electrical reliability of your slot cars with NSR Zero Grip tires, designed to eliminate unwanted front-end drag and improve braid contact with the rails. These ultra-low friction tires are typically used on front wheels, allowing them to roll smoothly with minimal resistance. Unlike standard rubber tires that create excess grip and scrub, Zero Grip tires let the front wheels glide, helping the chassis settle properly in the slot. Because the front tires are not gripping the track surface, more consistent pressure is maintained on the guide and braids, which can improve electrical pickup and reduce intermittent power loss —especially through corners. Features Size: 16 x 8 mm Fits rims: 16 mm, 16.5 mm, and 17 mm Quantity: 4 tires per package Material: Ultra-low friction compound Application: Ideal for front wheels on performance slot cars Performance Benefits Reduces front-end drag and rolling resistance Improves cornering balance and stability Helps maintain better braid-to-rail electrical contact Reduces front tire scrub in turns Allows rear tires to deliver maximum traction A simple but highly effective upgrade, NSR Zero Grip tires are widely used in competitive 1\/32 racing with cars from NSR, Slot.it, Scaleauto, and other performance chassis. Small change. Noticeable improvement in handling and reliability.\u003c\/p\u003e","brand":"SlotCar Supply","offers":[{"title":"Default Title","offer_id":46726024921285,"sku":"NSR-5200-EVO","price":11.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L43.webp?v=1786712059"},{"product_id":"self-adhesive-lead-weight-50-x-80-x-2-mm-nsr-nsr4831","title":"Weight – NSR 4831 Self-Adhesive Lead 50x80x2mm","description":"\u003ch3\u003eFine-Tune Your Car’s Handling with Precision Weighting\u003c\/h3\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThis NSR 50 x 80 x 2 mm\u003cstrong\u003eself-adhesive lead weight sheet\u003c\/strong\u003eis well suited to adjusting balance and improving traction in your slot cars. Whether you’re optimizing weight distribution for high-speed cornering or adding downforce to boost grip, this high-density sheet offers a simple and effective tuning solution.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePeel-and-stick application\u003c\/li\u003e\n\u003cli\u003eEasily trimmed to size\u003c\/li\u003e\n\u003cli\u003eAdds low-center gravity for better handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLegal for CARS H\u0026amp;R series races.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eDimensions \u0026amp; Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Lead with adhesive backing\u003c\/li\u003e\n\u003cli\u003eSize: 50 mm x 80 mm\u003c\/li\u003e\n\u003cli\u003eThickness: 2 mm\u003c\/li\u003e\n\u003cli\u003eManufacturer: NSR\u003c\/li\u003e\n\u003cli\u003ePart Number: NSR4831\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReview all photos—they’re part of the item description\u003c\/li\u003e\n\u003cli\u003eDon’t hesitate to message me with questions before purchasing\u003c\/li\u003e\n\u003cli\u003eNot intended for use by children—contains lead; wash hands after handling\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SlotCar Supply","offers":[{"title":"Default Title","offer_id":46726024986821,"sku":"SLF-DHS-LD-WGH1","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L44.webp?v=1786712064"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/collections\/Parts_-_New_70820025-c417-4373-ae10-2e73012d9877.jpg?v=1788874331","url":"https:\/\/omnislotbox.com\/collections\/new-slot-car-parts.oembed?page=8","provider":"OmniSlotBox at the Slotcar Clubhouse","version":"1.0","type":"link"}