{"title":"Motors","description":"\u003cp\u003e\u003cstrong\u003eSlot Car Motivation!\u003c\/strong\u003e\u003c\/p\u003e","products":[{"product_id":"motor-lighting-ii-40-000rpm-larger-cooling-holes-h-and-r-racing-hrml2","title":"Motor – SCALEAUTO Tech 3 Motor Series Motor – 30,000 RPM, 254 g-cm torque","description":"\u003cp\u003eScaleauto Tech 3 Series Motor – 30,000 RPM \/ 254 g-cm Torque High RPM Power That Plays Nice With Home Setups The Scaleauto Tech 3 motor delivers serious speed while remaining compatible with typical home racing power supplies — no need for a high-amp commercial setup to enjoy high-performance results.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cp\u003eAt a Glance: RPM: 30,000 @ 12V Torque: 254 g-cm Max Current: 370 mA Shaft: 2mm plain Fitment: Standard 1\/32 and 1\/24 motor pods well suited to analog club racing or high-speed tuning of your home slot car — especially where lower current draw is important (Carrera wall pack compatible!).\u003c\/p\u003e\n\u003cp\u003eUse \u0026amp; Compatibility: Plug-and-play with Scaleauto, Slot.it, NSR, and other standard-size pod systems Recommended for analog tracks running 12–15V Works well on foam or urethane tire setups Excellent upgrade for home sets where magnet-free grip and high RPM response are desired\u003c\/p\u003e\n\u003cp\u003eCommunity-Backed Performance I’m Jim Cunningham, founder of OmniSlotBox and host of the SlotCarClubhouse in Sherwood, Arkansas. You're welcome to visit — just make an appointment at\u003c\/p\u003e\n\u003cp\u003eCombined\u003c\/p\u003e\n\u003cp\u003eHappy Racing! ~ Jim Cunningham\u003c\/p\u003e","brand":"SlotCar Supply","offers":[{"title":"Default Title","offer_id":46726021710021,"sku":"MTR-LGH-II-40","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p92.webp?v=1786711949"},{"product_id":"rms-124-cm-carrera-124-12-14-volt-tuning-motor-drop-in-wpinion-leads","title":"Motor RMS-124-CM Carrera 1\/24 12-14 Volt Tuning DROP IN w\/pinion \u0026 leads","description":"\u003cp\u003eRMS-124-CM High-Performance Motor for Carrera 1\/24 – Plug \u0026amp; Play Upgrade Includes Pinion Gear \u0026amp; Wiring Harness – No Soldering Required! Product Overview Unleash the full potential of your Carrera 1\/24 slot cars with this drop-in RMS-124-CM motor upgrade. Designed for seamless compatibility with both analog (12–16V) and Carrera Digital (D124\/D132) systems, this high-torque motor transforms your 1\/24 models into fast, responsive race machines—without needing extra tools, adapters, or modifications. Use of this motor lets your 1\/24 cars run at the same voltage and pace as your 1\/32 cars. No more switching from 14.5V for 1\/32 and 18V for 1\/24—run them all together at a single, optimized voltage setting. The motor’s greater efficiency also reduces current draw, allowing more cars (often 5–6) to run on a stock Carrera 1\/24 power supply without overloading it. Key Features Plug \u0026amp; Play Installation – Comes pre-installed with pinion and wiring harness. No soldering needed. Compatible with Stock Carrera Power Systems – Works with standard analog or digital packs. Low-Amperage, High-Output Design – Run more cars with the same power supply. 12V Rated, Handles Up to 24V – Incredible flexibility for variable power setups. No Chassis Modifications Required – Uses stock mounting and hardware. Massive Performance – Rated 30,000 RPM at 12V (compare to Carrera’s 24K at 18V). Ideal Power Range – Best results between 12–14V. Use Control Unit settings or external power supply to fine-tune. Great for Drift or Grip – Excellent torque for both magnet and no-magnet setups. Whether you’re racing on a home layout or building up a club fleet, this motor is a proven performance booster for Carrera 1\/24 cars—without compromising reliability or requiring costly mods.\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726022136005,"sku":"RMS-124a","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L3.webp?v=1786711969"},{"product_id":"professor-motor-pmtr1049-set-of-3-brass-solder-on-terminals-for-direct-connection-to-carrera-terminal-track","title":"Controller – Professor Motor PMTR1049 Set of 3 brass solder-on terminals for direct","description":"\u003cp\u003eProfessor Motor PMTR1049 Set of 3 brass solder-on terminals for direct connection to Carrera terminal track Set of 3 brass solder-on terminals for direct connection to Carrera brand home set terminal track. May be used with any brand of slot car controller or any brand of power supply. Includes color coded heat shrink tubing to cover the barrel section of the terminal after soldering.\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726023053509,"sku":"PMTR1049","price":4.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/L22.webp?v=1786711990"},{"product_id":"parma-501-24000-rpm-16d-deathstar-motor","title":"Motor – Parma 501 24,000 RPM 16D Deathstar motor","description":"\u003cp\u003eHere’s your polished GoDaddy-style listing for the Parma 501 16D Deathstar Motor – 24,000 RPM, formatted with your standard voice and structure, including GoDaddy-specific\u003c\/p\u003e\n\u003cp\u003eParma 501 – 16D “Deathstar” Slot Car Motor (24,000 RPM) Factory Sealed | Handout Class Legal | Includes 9T\/48P Pinion Gear The Parma 501 Deathstar is the industry standard for sealed 16D motors. Built for competitive performance with a tamper-resistant seal, this motor is ideal for handout classes, club racing, and racers who want consistent speed with simple tech compliance. Includes factory-installed 9-tooth, 48-pitch nickel-plated brass pinion gear (#520D).\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cp\u003eRPM: 24,000 Magnets: EPX high-power magnets Stack:.600\" Wire: 70 turns of 30-gauge Timing: Factory set at 25–30 degrees Endbell: High-quality nylon Gear: 9T\/48P nickel-plated brass pinion included (#520D) Seal: Tamper-resistant for class compliance (removable, not reusable)\u003c\/p\u003e\n\u003cp\u003eUpgradeable \u0026amp; Blueprint-Friendly These motors are legal as-is for sealed-motor classes, but can also be rebuilt and modified for open classes that allow tuning and blueprinting.\u003c\/p\u003e\n\u003ch3\u003ePower Requirements\u003c\/h3\u003e\n\u003cp\u003eThis is a high-performance motor and is not compatible with standard \"wallwart\" home power supplies. For best results, use: An aftermarket regulated power supply A quality controller rated between 15 and 35 ohms\u003c\/p\u003e\n\u003cp\u003eTrusted by Racers – Race-Ready Reliability Whether you're racing in sealed-motor handout classes or building a high-horsepower scratchbuilt car, the Parma Deathstar delivers race-tested performance and long-term reliability.\u003c\/p\u003e\n\u003cp\u003eFrom a Racer You Can Trust I'm Jim Cunningham, a lifelong slot car enthusiast and founder of OmniSlotBox and the SlotCarClubhouse in Sherwood, Arkansas. With over 50 years in the hobby, I’m committed to providing quality gear, clear support, and friendly service. You're also welcome to\u003c\/p\u003e","brand":"OmniSlotBox","offers":[{"title":"Default Title","offer_id":46726026789061,"sku":"PRM-501-24-000","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/Omin44.webp?v=1786712136"},{"product_id":"lighting-motor-ii-40000rpm-larger-cooling-holes-hr-racing-hrml2","title":"Motor Lighting II – 40,000RPM – Larger Cooling Holes H\u0026R Racing HRML2","description":"\u003cp\u003eH\u0026amp;R Racing HRML2 – Lighting II Motor (40,000 RPM, Large Cooling Holes) High-Speed Power for Foam Tire \u0026amp; Softbody Slot Cars Product Overview The Lighting II Motor by H\u0026amp;R Racing (HRML2) is a 40,000 RPM high-performance motor designed for maximum speed and endurance. Featuring larger cooling holes for improved heat dissipation, this motor stays cooler during long runs, providing consistent power and reduced wear. It’s CARS series legal for foam tire and softbody cars and is ideal for racers looking to push their builds to the next level. Key Specifications Rated RPM: 40,000 Application: 1\/24 Scale Slot Cars (Foam Tire \u0026amp; Softbody builds) Cooling: Large Vented Openings for maximum airflow Motor Type: Mabuchi-style Series Approval: Legal for CARS H\u0026amp;R Series\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726026887365,"sku":"H-R-RCN-HRM1","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/Omin46.webp?v=1786712138"},{"product_id":"hawk-motor-1-18000rpm-mabuchi-replacement-type-hr-racing-hrmh1","title":"Motor, Hawk 1 – 18,000RPM – Mabuchi Replacement Type H\u0026R Racing HRMH1","description":"\u003cp\u003eH\u0026amp;R Racing HRMH1 – Hawk 1 Motor (18,000 RPM) Reliable Mabuchi-Type Replacement for 1\/24 Scale Racing Product Overview The Hawk 1 Motor from H\u0026amp;R Racing is a reliable and consistent 18,000 RPM powerplant well suited to club and home 1\/24 scale racing. Designed as a high-quality replacement for standard Mabuchi motors, the HRMH1 delivers smooth performance with excellent durability. This is the approved motor for Central Arkansas Racers of Slotcars (CARS) H\u0026amp;R Series races and is a great choice for building or maintaining legal competition cars. Key Features RPM: 18,000 Motor Type: Mabuchi-style can Fitment: Standard 1\/24 scale H\u0026amp;R and similar chassis CARS Legal: Approved for CARS H\u0026amp;R Series races Application Notes Ideal balance of power and control for club racing Not overpowered—helps reduce damage and ensures tight racing Works perfectly with H\u0026amp;R rolling chassis and gear ratios\u003c\/p\u003e","brand":"Professor Motor","offers":[{"title":"Default Title","offer_id":46726027051205,"sku":"HWK-MTR-1-18","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/Omin-47.webp?v=1786712139"},{"product_id":"382819012-carrera-1-24-boxer-long-can-motor-17-500-rpm-high-torque","title":"Motor, Carrera 1\/24 Boxer long can. 17.500 RPM high torque","description":"\u003cp\u003eCarrera Boxer Long Can Motor – 17,500 RPM High Torque Tested \u0026amp; Lightly Used – Broken In and Ready to Run\u003c\/p\u003e\n\u003ch3\u003eProduct Details\u003c\/h3\u003e\n\u003cp\u003eThis is a genuine Carrera Boxer-style long can motor, known for its strong torque and smooth power delivery. Ideal for high-grip tracks or heavier 1\/32 and 1\/24 scale cars. RPM: 17,500 Torque: High torque output Type: Long can motor Brand: Carrera Condition: Tested, lightly used — properly broken in for optimal performance A great upgrade or replacement motor for Carrera Digital or analog conversions.\u003c\/p\u003e","brand":"Carrera","offers":[{"title":"Default Title","offer_id":46726030655685,"sku":"y5boEbzrNxLz81Dp","price":2.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/Omin104.jpg?v=1786712227"},{"product_id":"carrera-89562-motor-e200-for-ktm-x-bow-lola-t222-mclaren-m20-audi-r18-porsche-917k","title":"Motor – Carrera 89562 Motor E200 for KTM X-Bow, Lola T222, McLaren M20, Audi","description":"\u003cp\u003eCarrera 89562 Motor E200 for KTM X-Bow, Lola T222, McLaren M20, Audi R18 \u0026amp; Porsche 917K Replacement slim format motor. Includes pinion gear.\u003c\/p\u003e","brand":"Carrera","offers":[{"title":"Default Title","offer_id":46726030753989,"sku":"CA-89562","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p201.webp?v=1786712231"},{"product_id":"hawk-7-motor-skf-dual-ball-bearing-also-known-as-jk30307bb","title":"Motor – JK Hawk 7 JK30307BB – Dual SKF Ball Bearings","description":"\u003cp\u003eHawk 7 Motor – Dual SKF Ball Bearings – JK30307BB High-Performance 12V Motor for 1\/24 Slot Cars This version of the legendary Hawk 7 motor is equipped with SKF dual ball bearings for smoother, longer-lasting performance and improved reliability under load. Ideal for commercial 1\/24 racing where durability and speed are critical.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003eMotor Type: Hawk 7 Part Number: JK30307BB Bearings: SKF dual ball bearings (front \u0026amp; rear) Voltage: Optimized for 12V use RPM: Approx. 38,000 (unloaded at 12V) Can Size: Standard FK motor size Application: 1\/24 commercial slot car racing, JK Cheetah chassis, high-speed builds\u003c\/p\u003e\n\u003ch3\u003ePerformance Highlights\u003c\/h3\u003e\n\u003cp\u003eSmoother operation with less friction Increased durability and motor life Excellent for tracks that demand high-speed consistency\u003c\/p\u003e\n\u003cp\u003eLet’s Race! You're welcome to visit our track in Sherwood, AR — appointments at:\u003c\/p\u003e","brand":"JK","offers":[{"title":"Default Title","offer_id":46726035800261,"sku":"HWK-7-MTR-SKF","price":18.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/files\/p422.webp?v=1786712378"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0776\/4937\/9525\/collections\/motivation.jpg?v=1788881672","url":"https:\/\/omnislotbox.com\/collections\/motors-1.oembed","provider":"OmniSlotBox at the Slotcar Clubhouse","version":"1.0","type":"link"}